ACS Stepper Drive & Controller
Capabilities:
- 4, 8, or 16 move command modes (absolute, incremental, jog or home with analog output echoing position of actuator from encoder) for infinite positioning capability
- Analog position mode (0-10 Vdc or 4-20 mA)
- Adjustable motion profile parameters (velocity, accel/decel, force). Parameters are independently configurable for each move
- Ability to reduce holding current for energy savings
- End point correction
- Zone output based on position
- Force limiting capability
- Configurable digital I/O (24 Vdc Opto-Isolated)(NPN or PNP)
- Compatible with most 24 Vdc stepper motors
- Ethernet mode provides infinite positioning using EtherNet/IP and Modbus TCP protocols
- Dual Ethernet ports with internal switch for daisy chaining
- Analog output for Analog Position Mode
AM Motors for ERD
Features:
- Motor speeds up to 1,500 RPM
- Holding torque to 6.25 in-lbs (0.706 Nm)
- 500 line (2,000 count post-quad) encoder option
- 10 ft. power cables with connector pre-wired
Microstepping Systems
The DS [STAC6-S] Drive and SI [STAC6-Si] Controller/Drive represents the latest developments in stepper drive technology, incorporating features that provide the highest performance from today’s stepper motors. Its anti-resonance and waveform damping control algorithms make it a clear market leader. Combined with Tolomatic’s electric linear rod or rodless actuators they offer optimal performance in microstepping systems.
Features:
- Motor speeds up to 3,000 RPM
- High resolution (up to 51,200 steps-rev)
- Holding torque to 1845 oz-in (13.03 Nm)
- 2000 line Quadrature encoder option
- 10 ft. power cables with connector pre-wired