Hydraulic Tester
PPC-04/2 Series
Product Description
The PPC-04 /2 hydraulic testers were designed for initial start-up, service and maintenance work on fluid engineering systems. Hydraulic systems are becoming more and more accurate and thus require quick, simple checking of key hydraulic data.
The PPC-04 /2 hydraulic tester can be operated simply, using eight buttons. Just like all testers of the PPC series, it is superbly suited for measuring operating pressure, peak pressure, differential pressure, media temperature, flow and rotational speed.
The tester has two separate test inputs that automatically detect the connected sensors. The new two-line display now allows simultaneous display of both sensor inputs. The measuring unit can be selected during power-on at the touch of a button.
The ruggedness of the tester continues in the rubber protective coating that protects the actual tester against impacts. Voltage is supplied either by a commercially available 9 V battery (PPC-04-B /2) or from an integrated rechargeable battery (PPC-04-A /2 and PPC-04-AP /2).
Measurements taken over an extended period of time are possible, using a power supply (not for the PPC-04-B /2) which charges the rechargeable battery at the same time.
The data printout is used for the documentation requirement within the scope of ISO 9001 and is compliant with CE.
The PPC-04 /2 can be connected to a PC via an RS-232 interface through a data output (only for the PPC-04-AP /2). Connection to a USB port is possible using an optional adaptor. The PPC-04 /2 software that can be ordered separately is compatible with popular PC operating systems such as Windows® 95,
Windows® 98, Windows® 2000, Windows® NT and Windows® XP.
Every complete system includes a set of adaptors allowing connection of the pressure transmitters, not just to the STAUFF System Test 20, but also to the STAUFF Test 15/12/10 series. It is also possible to connect the pressure sensors under pressure, with the equipment switched on. The temperature and volume flow sensors are installed in the line. The rotational speed sensor is a non-contacting sensor and uses an optical mark on the rotating parts.
Measuring the differential pressure requires two pressure transmitters with identical measuring ranges.
Note: The hydraulic tester does not have an internal memory for measured values (except for the temporary MIN-/MAX memory)!
Technical Data
| PPC-04-B /2 – Version with battery
PPC-04-A /2 – Version with rechargeable battery PPC-04-AP /2 – Version with rechargeable battery and data output Measurements/Display
Power Supply
| Sensor Inputs (5-pin)
Data Output
General
|
Hydraulic Tester
PPC-06/08 Series
Product Description
The PPC-06/08-plus hydraulic testers have been especially developed for the growing demands of system monitoring and troubleshooting in hydraulic and pneumatic systems. The PPC-06/08 series has been fully revised and replaced by the PPC-06/08-plus series. The new units come with a USB interface, a larger data memory, and also considerably longer operating times with the rechargeable battery. They work with identical sensor connections as the PPC-06/08/12 series. Connecting the PPC-06/08-plus unit with the sensors is simple.
The ergonomically designed housing and the LCD display, which automatically sets to the appropriate line size, now allow problem-free use even under difficult environmental conditions.
The individual PPC-06-plus and PPC-08-plus testers differ in the number of sensor inputs (3-channel or 4-channel technology).
The PPC-06-plus and PPC-08-plus can measure, store and process relevant hydraulic parameters such as pressure, differential pressure, temperature, rotational speed, flow and hydraulic capacities. The comprehensive programmer options, and the internal memory capacity in particular, allow for diverse measurement and evaluation methods such as long-term measurements, trigger functions or measuring data from third-party sensors.
The PPC plus devices can store up to 1,000,000 measuring value points and 250,000 curve memory points. The stored values can be transferred using the built-in USB interface to a PC.
The included PPC software is compatible with popular PC operating systems (Windows® 95, Windows® 98, Windows® 2000, Windows® NT and Windows® XP) and permits various evaluation methods.
The automatic sensor recognition feature makes the PPC-06-plus and PPC-08-plus hydraulic testers easy to operate, and the testers can be individually configured to meet customer requirements with simple programming. Both hydraulic testers allow the data from third-party sensors to be measured and processed.
| Type | Number of Sensor Inputs | Integrated Data Memory for | |
| Data Points | Curve Memory | ||
| PPC-06-plus | 3 | 1,000,000 Points | 250,000 Points |
| PPC-08-plus | 4 | ||
Technical Data
| PPC-06-plus – Version with 3 sensor inputs
PPC-08-plus – Version with 4 sensor inputs Measurement / Display
Measured Data Memory
Power Supply
| Sensor Inputs (5-pin)
Data Output
General
|
Hydraulic Tester
PPC-12 Series
Product Description
The PPC-12 hydraulic testers have been especially developed for the growing demands of system monitoring and troubleshooting in hydraulic and pneumatic systems. Expanding on the PPC-04 /2 hydraulic tester, internal data memories for storing and further processing measured values have been integrated into the PPC-12 hydraulic testers.
The ergonomically designed housing and the LCD display, which sets automatically to the appropriate line size, now allow problem- free use even under difficult environmental conditions.
The PPC-12 testers differ in the size of the internal data memory and the number of sensor inputs (6-channel technology).
The PPC-12 can measure, store and process relevant hydraulic parameters such as pressure, differential pressure, temperature, rotational speed, flow and hydraulic capacities. The comprehensive programmer options, and the internal memory capacity in particular, allow for diverse measurement and evaluation methods such as long-term measurements, trigger functions or measuring data from third-party sensors.
PPC-12 can register and store up to 250,000 data points. The measured values can be transferred at any time to a PC by way of a data output (RS-232). It is also possible to connect to a USB port by means of an optional adaptor. The included PPC software is compatible with popular PC operating systems (Windows® 95, Windows® 98, Windows® 2000, Windows® NT and Windows® XP) and permits various evaluation methods.
The automatic sensor recognition feature makes the PPC-12 hydraulic testers easy to operate, and the testers can be individually configured to meet customer requirements without a great programming effort. All three hydraulic testers allow the data from third-party sensors to be measured and processed.
| Type | Number of Sensor Inputs | Up to … MIN-/MAX Values | Integrated Data Memory for Storable Curve (1 channel) | Storable Curves |
| PPC-12 | 6 | 250.000 | 240 | 40 (6 channel) |
Technical Data
| PPC-12 – Version with 6 sensor inputs
Measurement / Display
Measured Data Memory
Power Supply
|