These are individual subplates which can be bolted together to make a mounting surface for any number of 3/8˝ soft seal subplate type valves. Inlet pressure and exhaust connections are made to portholes on the side or bottom of either or both end plates, and are manifolded through to all sections. Cylinder and pilot ports come out the bottom of each subplate.
SM2. Subplate with 1/4˝ NPTF cylinder ports and 1/8˝ pilot ports.
SM3. Same as above but with 3/8˝ NPTF cylinder ports.
SMSC-4. End plate with 1/2˝ NPTF pressure and exhaust ports coming out side of end plate.
SMBC-4. End plate with 1/2˝ NPTF pressure and exhaust ports coming out bottom of end plate.
SMBE-3. Blind end plate to cover either end of assembly or can be used between subplates to separate pressure or media.
SMOS. Spacer. One required per assembly to support O-ring seals between first subplate and end plate.